CK 63-11(12)
 |
|
It is made with a digital read-out or with control of a NC unit
SPECIFICATIONS
|
Faceplate diameter, mm |
630 |
|
Quantity of T-shaped radial grooves, pcs |
8 |
|
Width of T-shaped grooves, mm |
14 |
| Diameter of the faceplate center hole, mm |
40Н7 |
| The largest weight of the workpiece, kg |
500 |
| Resolution of the digital readout unit |
0°00'01'' |
| Resolution of the NC unit* | 0,001° |
| Accuracy of the faceplate rotation angle** | ±3'' (±1'')** |
| The average bilateral positional deviation of the faceplate rotation angle* |
6'' |
| Straightness of the table faceplate working surface, mm |
0,006 |
| End play of the table faceplate working surface, mm |
0,006 |
| Parallel alignment of faceplate working surface to the table base, mm | 0,005 |
| Radial runout of the table faceplate center hole, mm |
0,004 |
| Perpendicularity of the faceplate working surface to the lateral base surface of the table, mm | 0,005 |
| Length, mm |
841 |
| Width, mm |
738 |
| Height, mm |
252 |
|
Weight, kg |
486 |
* Data for tables controlled by the NC unit.
**Data in brackets for the custom-made tables.